You can prevent mold and dirt from developing within your air conditioner by cleaning it up. You will get more use out of it in the long run. Additionally, a well-kept air conditioning system consumes less energy than the dirty one and helps you avoid scheduling regular AC maintenance in Plano, TX.

However, if you have never cleaned an AC before, it may appear overwhelming. Luckily, the procedure isn’t as difficult as it appears. You can keep your air conditioner clean and power-efficient by following the steps below.

  • Air Filter Cleaning

Ensure that your AC is turned off before removing the front panels and air filter. Use a vacuum cleaner to remove as much dirt as possible if it is full of dust or dirt. After that, wash your filter in lukewarm soap water and let it dry.

  • Grills And Exterior

The second step for cleaning your AC is to wash those dusty grills with water and detergent. If that is too much for you, use a wet cloth to wipe the dust away.

Wiping may leave a lot of dust behind, so we advise you to wash it. Wipe off the top and sides of your AC unit after you’ve cleaned the grill. This part may require professional help, so look for AC maintenance in Plano, TX.

  • Coils And Fins

Carefully comb the aluminum fins inside your air conditioner with a fin comb. Take your time with this procedure because the fins can be sharp, and they will bend quickly due to excess pressure.

If any of the fins bend, gently side or press them back in shape. Next, using your compressed air can clean the coils inside the machine. Remove any rubbish that may be keeping your unit from functioning properly.

  • Clean The Condenser

Use a vacuum and a towel to clean the blower’s fan blades thoroughly. After that, secure any loose mounting bolts. If the fan motor has oil ports, apply a few drops of lightweight oil or spray WD-40 into the ports. Using a mop, remove any excess water from the device.

  • Reassemble

Reassemble the condenser when you’ve finished cleaning the air conditioner. Any weeds, twigs, or vines that may obstruct airflow via the condenser unit should be removed.

  • Refrigerant Lines

Once done, check the refrigerant lines. They are usually insulated with foam insulation and run from the air handler’s evaporator coil to the condenser positioned outside your home.

Replace the insulation on the refrigerant lines if it is broken when cleaning your air conditioner to improve the efficiency of your system.

Cleaning an HVAC is an easy task if you are familiar with the various parts of the system. However, instead of cleaning the AC yourself, it is better to rely on professionals to help you sort out the task.

If you are looking for service providers for air conditioning repair in Frisco, TX, to get your HVAC unit cleaned, call us at (214)-664-6655.