How To Identify A Bad Furnace Ignitor?

You must have checked on Google heating repair near me when your furnace stops working. As it has various components that face frequent wear and tear due to constant running, it is rather common for the system to malfunction due to one part or the other.

One such part of your furnace that can cause the system to malfunction is the furnace ignitor. As the name suggests, the basic purpose of a furnace ignitor is to burn the gas that enters your furnace to generate heat. It has only one job, and it is small in size, but if it malfunctions, your furnace will not generate heat under any condition.

You need to take proper care of your ignitor so that your furnace works efficiently, and you do not have to spend your nights without a working furnace.

Here are some signs that may indicate a faulty furnace ignitor:

Furnace Breakdown

Your furnace can break down and stop functioning for many reasons, like a tripped breaker, dirty air filters, or faulty wirings. However, there might be some electrical issues too. You ought to do basic things like verifying whether the circuit breaker for your heater has been switched before calling an expert to check your faulty ignitor.

Another reason for a non-working furnace is a faulty furnace ignitor. If it is not starting up even after you have checked all the other parts, the real culprit may be the ignitor, itself. Hence, cleaning it should solve this problem. If the furnace does not start working, you can contact your HVAC company for heating repair in The Colony or the city where you stay.

Cold Air

A furnace works to provide you with warm air. However, if it is giving out cold air, surely that means something is not right. Before checking your furnace ignitor, you should check the other parts, like the thermostat and gas levels.

Once you are sure that the other parts are working efficiently, it means that the furnace ignitor has malfunctioned and is not burning the gas to generate heat.

Short Cycling

A furnace short cycles when it shuts off before reaching the required temperature. Short cycling happens when the furnace detects safety problems in it. Many components can cause the furnace to short cycle frequently, like dirty air filters and faulty wirings, but the ignitor can do this too.

Contact your HVAC company to help you replace or clean your ignitor for efficient working of your furnace.

No-Glow Ignitor

The new furnace models have ignitors in place of pilot lights as they are safer, quicker, and work on electrical detection. A properly-working ignitor should light up when you switch on your furnace.

However, if the ignitor does not light up, it means that your furnace needs professional attention. You can locate the ignitor where you used to find your pilot light.

If your furnace is not working even after you have tried the above tips, you need to contact an HVAC company for heating repair in Lewisville, TX, immediately as the problem may be more serious than it seems. Calahan Construction & Air is there to assist you with all types of HVAC services at one call. Contact us at (214) 664-6655 or email us at [email protected] to know more about our rates.

Significance Of Furnace Maintenance That You Should Know

Furnace maintenance does not mean spending money contacting a technician for heating maintenance in Plano, TX. In fact, it has its significance in the long run. You may think that by avoiding regular furnace maintenance, you can save some money. However, that is not the case. After a few years, you will notice that your furnace might stop functioning or create more issues.

In this blog, we will discuss the importance of furnace maintenance:

Thorough Inspection

When you contact your technician for furnace maintenance, they follow a proper checklist while working on your furnace. You will notice that the technician spends a few hours checking your furnace because it involves various steps:

  • Checking the Wirings
  • Lubricating and cleaning the parts and equipment
  • Inspecting the fuel lines and fuel levels for proper working
  • Testing the pilot light and calibrating pressure
  • Cleaning all the possible parts to remove dust and dirt
  • Finding any damage in the system that may create a serious problem in the future

All these points help in increasing the working efficiency of your system.

High Efficiency

Your technician checks and cleans all the possible parts of your furnace. This thorough inspection and cleaning during the maintenance schedule increase the efficiency of your furnace by many folds. A company that offers quick heating tune-up in Frisco, TX, takes care of the problems your furnace may be facing currently and the issues it might face in the future due to damaged or worn-out parts.

Before the maintenance schedule, many parts of your furnace did not have enough lubrication and cleaning that would help them in easier functioning. However, once the technician finishes the task, your system will work with its highest efficiency due to adequate fuel level, proper lubrication, and no dust to hinder the working process. In fact, because of high efficiency, you will probably use your system for a few hours. Eventually, your energy bills will be under control.

Family Health

Your furnace keeps your home warm, but it also takes care of your family’s health. Air filters are responsible for catching dirt, dust, allergens, bacteria, and pet hair from the indoor air to keep you safe. However, when your air filters get dirty and clogged, the indoor air will not purify on its own, and your family may face increased respiratory problems and allergies.

Increased Shelf Expectancy

A maintained furnace will not have to work for more hours as the system will work with its highest efficiency levels and warm the house quicker. Since it gets adequate rest and proper maintenance, the parts in the furnace will not face too much wear and tear and will function for more years.

In addition to that, if you plan to sell your home in the future, you will get a higher reselling value when you show the maintenance receipts to the interested buyers.

You should contact a reputed company that offers heating repair in Frisco, TX, to take care of your expensive and precious furnace. Contact Calahan Construction & Air for the best furnace maintenance services. Contact us at (214) 664-6655 or email us at [email protected] for assistance.

Things That You Can Do If Your Heat Suddenly Stops Working This Winter

The worst thing that can happen during the winter is a household furnace that suddenly stops working. If it’s a cold day, this can be a significant emergency.

What will you do if your furnace stops working in the winter? If you stay in TX, the appropriate answer is to call a professional for HVAC repair in Plano, TX.

Also, you can conduct several checks initially to discover if the furnace stopped working for any reason. Once you check other faults and errors, you may reach out to a professional. The things that you can check on your own are:

Check the Thermostat Settings

This may sound obvious, but that’s what people often neglect. A simple inaccurate setting on a thermostat can cause the furnace to shut off early or refuse to turn on when it should. If you have a programmable thermostat, check whether somebody has modified the program without telling you. And if you see a blank thermostat screen, the furnace has probably tripped its limit switch, and you should contact a service provider that can do the heating repair in Plano, TX, or the city you live in.

See Whether any Circuit Breakers have Tripped

Open the electrical panel of the house and check whether any breakers have tripped. It is wise to have all the circuits labeled with the sections of the house so you can immediately detect which appliances are affected. If the breaker of the furnace has tripped, reset it and try to turn on the furnace again. But, if it turns on but the breaker trips a second time, there might be an electrical problem within the heating system that a specialist must inspect.

Check the Pilot Light

Older furnaces that don’t employ an electrical ignition method will feature a pilot light. Inspect the furnace cabinet to see whether the pilot light has turned off. If you can’t relight it and keep it on, and there isn’t anything wrong with the gas line, you should contact a repair professional.

Ensure your Furnace Filters are Clean

Your furnace relies on a steady supply of clean air to heat your house. Believe it or not, a dirty air filter can prevent your furnace from switching on since the forced air system won’t supply the heat pump with the air needed to warm your home.

If a Filter is Clogged, Replace it

A filter protects the components of your heating system. If this filter gets too clogged, a limit switch will activate, shutting off the stove. Replace the filter and check whether the furnace starts up again. In fact, whatever you do, replace your furnace filter every one to three months to prevent this issue.

You’ll need HVAC specialists from Calahan Construction & Air to help you with your heating issues if the problem still persists. If you stay in TX, search for heating maintenance near me and get in touch with our experts. In order to know more about rates and book appointments, you can contact us at (214) 664-6655 or email us at [email protected].

Relation Between New Furnaces And Heating Efficiency

The saying “old is gold” does not apply to HVAC or other appliances or equipment. With the passing years, HVAC appliances, like furnaces, lose their working efficiency and start malfunctioning. This malfunctioning and lesser working efficiency increase the owners’ maintenance expenditure and energy bills.

The only way to solve the problem of an old and inefficient furnace is to replace it. Contacting an HVAC company for a heating tune-up in Carrollton, TX, for your old furnace is futile. Save your time and money, and purchase a new and efficient heating system.

When To Look For a New Furnace?

It is not hard to identify the signs that your old furnace is incapable of working now. The first sign of the inefficiency of a furnace is its age. The lifespan of a furnace is 8 to 10 years, which can stretch up to 15 years if you frequently serviced and maintained it. If your furnace has crossed the 10-year mark, you may start looking for a new furnace.

Another sign of an inefficient furnace is hot and cold pockets in the house when the furnace works. The temperature of two or more rooms should not be significantly different.

Also, an aging furnace that needs too many repair jobs is not worth the money. It will help if you are looking for a new furnace when the total expenditure for your current furnace increases beyond half the cost of a new furnace. You can contact your HVAC company that provides heating tune-up services in Carrollton, TX, to know about the latest models.

Advantages of New Furnace

HVAC appliances have come a long way. You may have purchased your current furnace a few years back. The difference between a furnace manufactured a few years back and a furnace manufactured this year is tremendous.

  • Material Type

The first difference is that factories manufacture the latest HVAC appliances with the latest components and materials. These materials support quicker heat transfer from the furnace to the house. With the quicker heat transfer, the furnace will not have to work for more hours, and you can save a few bills on energy consumption.

  • Electronic Ignition System

The latest furnace models have electronic ignition systems, which consume lesser electricity and are more reliable than the old pilot lights, which consumed electricity even when the system was off.

  • Second Heat Exchange

Old furnaces had one heat exchanger, but the latest models have two heat exchangers. The first heat exchange transfers heat from one area to another while the second heat exchanger collects the combustion gas vapors. The second heat exchanger condenses the gas vapors, extracts heat from them, and distributes the heat in the house.

Purchasing a new furnace does not mean that all you have to do is buy a furnace. You need to contact a reputed company that provides top-notch installation services because an efficient but poorly-installed furnace will not work up to the mark.

Calahan Constructions provides you with the best furnace installation and heat pump service in Lewisville, TX. Contact us at (214) 664-6655 or email us for our services

How To Save Money And Energy With Your Furnace

Homeowners seek ways to save money and energy. You may improve your house’s efficiency and save money on your annual utility costs without sacrificing comfort by updating or modifying the way you use your home appliances. Some tips to save money and energy on heating:

Ensure The Filter is in Good Working Order

  • The furnace filter’s job is to keep dust from clogging up your furnace.
  • Various factors determine the frequency with which you should update your filter.
  • The frequency with which you clean, whether or not you have pets, and whether or not you have recently renovated can all make a difference.

Don’t Make Excessive Thermostat Adjustments

  • Changing your thermostat habits can help you save money on your annual energy bill.
  • Consider purchasing a smart thermostat if you want more control over your temperature settings.
  • It communicates with temperature sensors in each room, automatically changing your home’s heating to your preferred temperatures.
  • Smart home technology might reduce your energy use by 10% to 20% per month.

Annual Furnace Maintenance

  • Cleaning and maintaining your furnace regularly will help it function more efficiently and extend its life.
  • Look for heat pump service near me today if your furnace hasn’t been serviced this year.
  • One malfunctioning item might pressure the remainder of the system, causing it to fail suddenly.

Purchase Double-Pane Windows

  • Because your windows account for 15-20% of your home’s surface area, it’s critical to ensure that air does not seep via window cracks and gaps.
  • Due to the gas in between the panes that boost insulation, double pane windows can also increase your R-Value by sealing air gaps in cold weather.
  • You can save nearly 25% on your annual energy bills by upgrading your windows.

Keep The Area Near The Furnace Free of Deterrents

  • Most furnaces are maintained in the basement, where we keep excess goods.
  • It’s critical to keep a 3-4 feet clearance area surrounding your furnace free of stored goods.
  • Because there is a burning gas in the furnace, this is a safety concern.
  • However, air can circulate freely, which helps the furnace work more smoothly.

Turn Down The Thermostat When Not At Home

  • Lowering the thermostat by two degrees while you’re gone can help you save money on heating.
  • While this is a good technique for the winter, it’s not a good idea in the summer.
  • The energy necessary to remove collected humidity and cool your home back to the intended set point after resetting your thermostat is often more significant than the energy required to maintain a given temperature.

Curtains Are a Fantastic Way To Save Money on Energy

  • Using your curtains strategically can help you save money.
  • You can avoid heat loss to the chilly outdoors by closing them at night.
  • Opening them on the south or west-facing windows during the day allows warm sunlight to enter and heat the interior of your home.

If you are looking for heating maintenance near me, we at Calahan Construction and Air can help. Call at 214-664-6655 or email us to set up an appointment today.

How HVAC Parts And Equipment Shortage Might Affect You

The global shortage of microchips and other critical supplies has produced a perfect storm in the HVAC business. While everyone is optimistic that the supply chain will eventually catch up, meeting the demand for new HVAC equipment is more difficult.

Consumers across the country feel the consequences of a severe HVAC equipment shortage. But who or what is to blame for this scarcity? How will this scarcity affect you as a consumer if you need HVAC equipment?

Impact These Shortages Have on Consumers

For customers, this often means that you will have to wait longer for a new HVAC unit or a replacement part for your system than you would have in the past. Being as proactive as possible and attempting to avoid problems from occurring in the first place is a fantastic method to do so. Here are a few leads to help you:

  • Replace the air filter every month or as needed for your unit.
  • Hire an expert like heating repair in Lewisville, TX, to tune up your system.
  • This will ensure that any abnormalities are detected well before they cause a system failure.

Which Shortages Are Affecting The Availability of HVAC Equipment?

When determining what is causing the parts shortages, there are numerous factors to examine.

  • Steel, aluminum, copper, and polymers are raw materials for new HVAC equipment.
  • Semiconductors are becoming increasingly scarce. Semiconductors are used in air conditioners because temperature sensors require them.

Shortages: What Caused Them?

COVID-19 Pandemic: The COVID-19 pandemic has caused delays and deterioration in many supply chains across a wide range of businesses. Many modes of transportation and travel were shut down due to pandemic restrictions, impeding the flow of products.

Suez Canal Blockage: The blockade of the Suez Canal in 2021 had a significant economic impact, disrupting the HVAC supply chain. The incident is likely to have been caused by a combination of technological and human faults.

The Texas Snowpocalypse: Intense snowstorms in Texas early in 2021 wreaked havoc on the economy. Due to the so-called “snowpocalypse”, multiple extensive semiconductor facilities experienced power outages and other interruptions.

The Renesas Semiconductor Factory Fire: A large fire at the Renesas semiconductor facility in Japan destroyed about 6,500 square feet of area and 23 machines.

How Can You Ensure That Your HVAC Systems Are Operational Throughout The Year?

Plan your seasonal tune-ups—heating in the fall and cooling in the spring. Your HVAC expert, such as heating repair in The Colony, will look for hidden dangers that may require future part repairs.

What Else Should Consumers Know About The Supply Shortage?

The supply chain constraint isn’t affecting just one product line or a few companies in specific areas — it’s affecting the entire sector. While the scarcity is still in effect, it’s critical to keep your present unit in good working order so you don’t have to replace it during the peak of the shortage.

We at Calahan Construction and Air can help you keep your HVAC in working order. Call us at 214-664-6655 or drop a mail here.

Early Signs That Your Furnace Needs Repair

When the weather turns cold, you depend on your furnace to warm your home. However, your furnace might sustain damage without your knowledge. When an issue with your unit emerges, it is critical to schedule furnace repairs as soon as feasible.

Common Indications That Your Furnace Needs Maintenance

  • Noxious Odors

If you detect a lingering odor or one that emerges out of nowhere and doesn’t go away, it’s time to have the furnace serviced. Strong odors coming from your exhaust could indicate poor combustion.

  • Starting The Unit is Difficult

If you have to restart your furnace or start the unit several times throughout the day, you most likely need repair. These functional faults are frequently caused by faulty wiring or thermostats.

  • Gas Leak

If you detect a gas leak, you must immediately contact an HVAC technician like heating repair in Frisco, TX, to address the issue. Turn off the furnace as soon as possible because the gas is highly combustible, and a single spark might spell disaster for your home.

  • Unusual Sound

Loud and persistent noises can suggest a significant problem. Squealing and whistling noises can be caused by belt or fan problems, whereas banging or broken or loose internal components can cause rattling.

  • Rising Electricity Bills

If you notice rapid or even slow, inexplicable increase trends, it could be an indication that your furnace isn’t working correctly, and you’ll need a specialist to inspect it.

  • Discolored Pilot Light

Pilot light with a different hue than blue, mainly yellow, can indicate a ventilation issue when gases such as carbon monoxide do not disperse as they should, the color changes. This might cause health risks or possibly make your unit more flammable.

  • Inconsistent Heating

If your furnace is working correctly, you should not notice any cold or hot spots around the house. Still, if you’re finding wildly varied temperatures in identical situations, it’s a clue that your furnace needs to be repaired.

  • Poor Air Quality

Dirt, bacteria, and other foreign particles may be carried throughout your home by a poorly maintained system along with the warm air. If you or someone in your family is allergic to foreign particles, the number of foreign particles available may produce symptoms such as itching, watery eyes, and headache.

  • Carbon Monoxide Warnings

If your carbon monoxide alarm is sounding, you have a severe problem that must be treated before it harms your health. Because carbon monoxide is colorless and odorless, the carbon monoxide alarm is the only means to detect it.

  • Water Leaks

If you see a puddle of water close to your furnace, you most likely have a water leak. An interior drain system obstruction could also be the source of a water leak. Ensure that the water leak does not lead to more severe issues.

Don’t wait for your furnace to break down. As soon as feasible, schedule a heating repair in Plano, TX. Call us at 214-664-6655 or drop us a mail here. At Calahan Construction and Air, we can always be counted on to provide the best services at the most reasonable pricing.

How Can A Dirty Air Filter Stop Your Furnace?

During the winter, your heating system keeps your home warm and comfortable. However, difficulties with your furnace caused by a dirty air filter can prevent it from producing enough heat when you need it the most. If you leave your furnace’s air filter in place for too long, it might become so filthy that the device stops working entirely.

You should replace the air filter every month to avoid clogging every once in a while. Even though your furnace is the primary heat source, the equipment itself requires unobstructed airflow to function correctly. Of course, it takes some time for a dirty filter to cause the furnace to shut down altogether. And there will be plenty of warning signs before it happens.

What Happens When An Air Filter In a Furnace Remains Clogged?

  • Airflow becomes slowed and restricted when air filters become clogged, which may not be visible at first. That is, the furnace is having difficulty breathing.
  • As a result, the air handler in the unit has to work harder. It must do so to compensate for the limited airflow.
  • A clogged air filter hinders air from entering the furnace from your home. When this occurs, the system shuts down because it understands something is wrong.
  • When it isn’t working correctly, it shuts down rather than allowing any components to burn out or otherwise fail.
  • Even if the filter is functioning correctly, it will slightly reduce air circulation in your home, preventing dust and other microscopic particles from entering the furnace through the ducts.
  • The dirty filter prevents too much air from passing through. When circulation becomes insufficient, the system cannot function properly. This activates the failsafe, causing it to shut down.

How To Care For Your Filter?

While dirty air filters might cause a furnace to stop working, there are several ways to keep your furnace well-maintained and running correctly for a more extended period.

  • Cleaning a Reusable Air Filter

If your furnace has a reusable air filter, you don’t have to replace it every time it gets dirty. Remove the filter from the furnace and rinse it with warm water to clean it. Shake the filter after washing it to remove any excess moisture.

  • Changing a Disposable Filter

If your furnace has a disposable filter, replace it regularly. A skilled professional like heating maintenance Plano TX can replace it for you.

What if Your Air Filter Appears To Be Clean When It’s Time To Replace It?

  • When it’s time to replace your furnace filter, about 1 to 3 months after installing a new one, it should be filthy with visible dust buildup.
  • If your filter appears clean and has been in place for the necessary duration, you should perform some checks.
  • If the filter fits perfectly into the holder, is fitted upside down, is the right size, or the air exchange rate is perfect or not.

If you need an HVAC repair in Plano, TX, call us at 214-664-6655 or email us. You can always rely on Calahan Construction and Air for the most excellent services at the most reasonable prices.

3 Safety Tips Before You Turn On The Heater

At any point in time, no person would be willing to compromise on the safety of their family members, especially when it comes to the usage of appliances. With time, the performance of heaters and other electrical systems might dwindle. So will the safety aspect. Hence, it would be best if you were not ignoring heating tune-up Carrollton TX visits. Scheduling a maintenance visit from HVAC experts can help you mitigate the risks that might arise due to the growing age of the heating system. They will diagnose any existing problems with the heater and provide you with the necessary corrective action.

Three Safety Tips To Prepare Before You Turn On The Heater

After installing a heating system, you should also pay significant attention to the safety tips; HVAC contractors suggest you. These tips will help you ensure the household’s safety. Below are a few common safety tips most HVAC contractors convey to their customers.

  • Remove Any Flammable Object Around Your Heating System

In most homes, furnaces are placed in garages. However, in condominiums and apartments, they install heating units in the closets. Placing a furnace in a closet might expose you to several risks. Several people might keep gasoline, paint cans, and paper towels in the closet. These items are highly flammable and likely to catch fire if they are near a furnace. Hence, before setting the thermostat, you should ensure that no such objects lie close to the heating system. If you are unsure which items you should remove, contact a heating tune-up Carrollton TX HVAC contractor for guidance.

  • Replace The Dirty Air Filter

You should always check the air filters before you switch on your heating system. The air filters are one of the first parts that the indoor air comes in contact with. The primary job of an air filter is to capture the dirt particles and germs present in the air. Thus, the filters ensure high-quality air for the residents of the house. Additionally, a dirty filter might not work efficiently. A heating tune-up will ensure that you do not breathe impure air.

  • Clear The Flue Pipe

The flue pipe is responsible for transporting the fumes generated by the fire. It is one of the most integral components of the furnace and ensures the good health of the people within the house. If the flue pipe gets damaged, you should immediately reach out to heating tune-up Frisco TX HVAC contractors. Even a slight delay might result in hazardous gases like carbon monoxide leaking into your house. You would not want to expose your family members to such risks, do you?

You would rather be safe now than be sorry later on. Hence, you should not delay in contacting the heating tune-up Frisco TX HVAC contractors.

Calahan Construction & Air is a reliable company that works hard to offer the best HVAC services to its clients. We stay ready to help our clients in any emergency, only by calling us on (214) 664-6655.

5 Reasons To Have A Seasonal Inspection On Your Heating System

People wish for a cozy home when the peak of winter arrives. What if you turn on the furnace only to confront some issues while running. It could be an uncomfortable situation to be in for the entire family. To avoid such unexpected disruptions, get a seasonal inspection of your heating unit. Look for an HVAC company using the search query heating maintenance near me online.

Call up and schedule an appointment with the furnace experts who will closely inspect your heating unit and solve the furnace issues that could have turned into a winter nightmare.

Five Reasons Favoring A Seasonal Inspection On Your Heating System

  • For Smooth Performance

The heating and cooling units use up about half of the total energy consumed in your home. Thus, it is crucial to choose the best for your HVAC units. When you search for the best heating maintenance near me and hire furnace services, the technicians will check your furnace and restore its functioning to the optimal level.

  • Keep Your Furnace In Warranty Period

When you schedule annual HVAC services from a reliable heating repair service, it will keep your furnace in the warranty period. In such a case, if anything wrong happens with your furnace, the warranty may cover most of the expensive repair costs. However, you will need to invest a huge amount to get your system fixed without a warranty.

  • Increase The Lifespan Of Your Heating System

Search for excellent heating maintenance near me, and schedule regular tune-ups. It helps your HVAC technician in detecting your furnace defects much early. Eventually, these defects can lead to a furnace failure when left unaddressed. In such conditions, a new furnace installation may be the only solution to your problem. To avoid such a situation, you should plan a seasonal inspection of your furnace. Regular maintenance will also reduce the load of your furnace and make it run smoothly.

  • Remove Dirt And Rust

Leaving your heating unit unused for a long break during the summers also affects its performance. It increases the possibility of accumulation of dust and rust. When you book heating maintenance near me, the professionals will clean the accumulated dust and rust. They will clean the air filter of your furnace. Clean air filters, ducts, and vents reduce the unnecessary burden on your furnace.

  • Increases Safety Levels

Annual heating system tune-ups reduce many potential risk factors in your furnace. For example, the heating experts look for any possibility of carbon monoxide leakage, or electric and plumbing issues, etc. They fix all the problems before they transform into some dangerous risks. Carbon monoxide leakage is one of the most hazardous problems of a furnace. A crack in your furnace’s heat exchanger or blockage in the air pathway of your furnace leads to a leaky condition. To save your family from such risks, keep scheduling heating repair and maintenance for the efficient performance of the furnace and regular safety checks.

Calahan Construction & Air always stands ready to provide any HVAC service to clients. We focus on offering the best quality service along with money-saving plans, like financing. Dial our emergency number (214) 664-6655.